1 Title (subject): Why not be displayed differently?????
1) CPU-Z SPD understand and go items
2) memory overhead clock when CPU-Z DRAM Frequency
3) overclocking memory differs from the basic module (chip) according to the manufacturer specifications
4) to finish review
So We will provide as much detail as possible and I'll slowly by reading.
^ ^ Unfortunately, you can only do. Seusyat no; ㅜ ㅜ
1 Title (subject): Why not be displayed differently?????
For example, one frequent question I heard recently
Overclock for 1866MHz (PC3-14900) 4GB memory, thinking
From the motherboard, RAM timing, clock, and the computer to normal voltage setting and works to
CPU-memory mounted on the Z SPD entries bandwidth PC3-10700 (667MHz) brings out the ...
Why is this? Are my settings wrong?
Or bad memory?
PC3-14900 memory, I mountain is, CPU-Z coming out with a PC3-10700
I bought the 1866MHz-memory, why 667MHz CPU-Z on stage?? ㅜ ㅜ
Memory purchased the above questions nutshell normal setting, but,
Why is CPU-Z is the issue of different figures doeneunya
If you do not have an exact theory for the first time or memory overclocking progress on that part
Is really a lot that can be embarrassing.
1) CPU-Z SPD understand and go items
Well, first of bandwidth part and its function in the entries in the SPD entry, look for
Role reads the corresponding portion of the installed memory module (chip) information only.
(Really just simply reads the role only.)
For example, DDR3 1333MHz (PC3-10600) was fitted to the specifications of the product,
CPU-Z SPD bandwidth PC3-10700 (667MHz) to display a portion of the reason that the
Notation to be sold when the corresponding memory and CPU-Z specification notation differences.
To explain in detail below,
DDR3 1333MHz (PC3-10600) memory that is sold in sizes from
1 DDR3 Double Date Rate specification. (Everybody knows you know, doubling (x2) ^ ^)
2 1333MHz: Preview (x2 times) behavior when the maximum effective clock to the DDR memory.
3 PC3-10600: 1333MHz clock quantify memory per second throughput (MB / s) specification.
Item 3 times of throughput (bandwidth) calculation is simple.
8 byte per second throughput of DDR memory. In other words, 64bit (8bit = 1byte.)
To 1333MHz 1333MHz rangeon seconds as it is converted to approximately 13.33 billion times the vibration speed by calculating
X 8byte 1333MHz = 10664 MB / s (this value is for sale at specifications, PC3-10600, as part of the specification.)
So the reason that display 10,664 items from SPD is 10,700 rounded.
Party and twice in the description above 1333MHz (x2) DDR to operate at the maximum effective clock;
Conversely, division 2, the original default clock would not it?
* 1333MHz / 2 = 666.5MHz
, DDR3 1333MHz (PC3-10600) specifications from the memory module (chip)
Valid basic room clock is 666.5MHz.
The corresponding module (chip) of the basic specifications (specs) 666.5MHz clock means literally.
So, as I explained above, the CPU-Z SPD entry module (basic information of the chip) itself (specifications, specs)
Rounding it with literally Reading because 666.5MHz to 667MHz which is why
(According to the additional memory and module manufacturer the DDR 1333MHz (PC3-10600) memory specifications at
SPD PC3-10600 (666MHz) as the item is displayed. In that case, the
^ ^ You do not have to worry about the normal-Did you read the module information.)
CPU-Z Memory DRAM Frequency (frequency) in this state and look
Part of the same room with the SPD entry is valid, the clock (667MHz) is the part that is displayed.
However, you need to understand the parts
SPD entry module (chip) itself as reading notation as above, but because of the
CPU-Z Memory DRAM Frequency (frequency) of CPU internal clock rate
Set the actual behavior and action () Thread valid clock is displayed
Valid SPD entry room clock (667MHz) and always 100% identical figures may not be displayed.
System and in accordance with the CPU specifications 666MHz, 666.5MHz, 655MHz, 633.5MHz, etc.
Approximation can be displayed, or 100%, might appear to be the same figures.
Or even if with different specifications (clock) memory sub-clock
Automatically synchronize its sub-clock room doeseo valid clock is displayed.
Keep in mind this part accurately.
2) memory overhead clock when CPU-Z DRAM Frequency
Well above a general understanding of death, if memory overclocking after
CPU-Z that overclocking the memory normal operation which should
Some sense will come.
Check whether the normal operation of that memory after memory overclocking settings
In other words, CPU-Z Memory DRAM Frequency (frequency) levels should be.
If you set the normal for overclocking DDR3 1866MHz (PC3-14900) equipped with memory specifications He
Valid thread 1866MHz clock 1866MHz / 2 = 933MHz, so
CPU-Z Memory items DRAM Frequency (frequency) levels
Is displayed, or the closest approximation to the same 933MHz operation and must.
3) overclocking memory differs from the basic module (chip) according to the manufacturer specifications
Another important part of the
Why overclocking DDR3 1866MHz (PC3-14900) for specification Replace the memory was
CPU-Z SPD DDR3 1333MHz (PC3-10600) memory specifications when installing like
PC3-10700 (667MHz) that is displayed??
Chamber as previously described 1866MHz of effective clock 1866MHz / 2 = 933MHz;
PC3-14900 (933MHz) as the CPU-Z SPD entries must be labeled.
However, the memory itself overclocking memory for lf reason.
DDR3 1866MHz (PC3-14900) specifications specifications at the time of sale, but the memory of
Mounted on the actual corresponding memory module (chip) DDR3 1333MHz (PC3-10600) standard
Module.
However, the basic specification DDR3 1333MHz (PC3-10600) specifications of the module (chip), and
Actually DDR3 1866MHz (PC3-14900) to operate without problems until overclocking module (chip).
So, CPU-Z SPD entries finish DDR3 1333MHz (PC3-10600) memory specifications during the same
PC3-10700 (667MHz) is the part that is displayed.
He set the normal memory overclocking
Overclocked CPU-Z Memory DRAM Frequency (frequency) in the memory
If you have to make sure you operate as a normal clock,
CPU-Z SPD entries of the module (chip) Information You do not need to worry or feel embarrassed at all.
In fact, for overclocking DDR3 2400MHz (PC3-19200) standard memory during
Specification module (chip) DDR3 1333MHz (PC3-10600) is also available.
Even if the CPU-Z SPD entry and PC3-10700 (667MHz) will be displayed.
However, If you normally overclock settings,
Valid thread 2400MHz clock 2400MHz / 2 = 1200MHz, so
CPU-Z Memory items DRAM Frequency (frequency) levels
Is displayed, or the closest approximation to the same 1200MHz operates must.
4) to finish review
Conceivably something to be desired finished ^ ^
Some examples stick, finishing
DDR3 1600MHz (PC3-12800) memory specifications at
Valid thread 1600MHz clock 1600MHz / 2 = 800MHz, so
PC3-12800 (800MHz) as the CPU-Z SPD entries are displayed.
, CPU-Z Memory items DRAM Frequency (frequency) levels
Is displayed, or the closest approximation to the same 800MHz operation and must.
But, DDR3 1600MHz (PC3-12800) DDR3 1333MHz (PC3-10600) Specification
If equipped with two different clocks, ie the two is, as described above,
Because the sub-clock automatic synchronization
So, CPU-Z Memory items DRAM Frequency (frequency) levels
Effective Clock 1333MHz thread, 1333MHz / 2 = 666.5MHz
In other words, the closest approximation to the same 666.5MHz or behavior.
So far, I have explained the contents of the already over-experienced or memory clock
People know about the action part can be fairly easy to talk
PC to learn yet, but people or memory overclocking and CPU-Z Memory Data
^ ^ If you are unsure about the part, think a little bit of help will be rewarded.
No comments:
Post a Comment