Q: As you know failure alarm
If AMI BIOS
Resolution number of beeps
No. 1: normal
2: parity check fails, the memory problem memory socket memory again or bad or kkot
3: Check the default memory failure Bad motherboard's main board, the A / S confirmed
4: System timer failure The main board more than a backup battery
5: Processor Error The CPU-related check the connection status, and lower the clock speed or replace
6: The keyboard controller connection status check fails, the input device error kibodeugyochena
Gate A20 failure or
No. 7: The processor supports the processor in the BIOS interrupt error or bad hajimot
8: Check or replace the graphics card graphics memory error
No. 9: Check the BIOS ROM BIOS setup and re-check error logs
No. 10: Shimo-off read / write failure Bad motherboard is replaced, or A / S
11: Bad CPU's L2 cache, the cache memory failure or not recognized correctly
If you set up the gun off in the BIOS Features Setup Menu
CPU Level 2 Cachc item is set to Disabled
Ssayireneum: CPU overheating, the CPU replacement kulreogyochena Status Severity
If AWARD BIOS
Resolution number of beeps
Short a time: normal
Short 2: nonfatal error on the screen when the BIOS settings are correct, the error
If the message ttarahamyeondoem
Short 3: Check the status of the keyboard controller error kibodeugyochena connection
Hold a beonjjalge 1: Motherboard error Unknown error re-assemble the main board
Hold a beonjjalge 2: Graphic card error reinstall or replace the graphics card
Hold a beonjjalge 3:,,,,
Come up with any alarm system without a power failure or CPU namemoriuibulryangyimeuro
If it does not appear on the screen: the main board A / S get or replace
Continuous beeps: System Error Motherboard A / S, or verify that the parts are installed correctly
No comments:
Post a Comment